AMX-4 Series Cable Clamp and Strain Relief Bushings Kit

AMX-4 Series Collimator handle cover Kit (Includes 2 sets L&R Covers, 2 actuators, 1 Adapter, 1 Micro switches, 1 Button Return Flat Spring, 2 Spacers

AMX-4 & AMX-4+ Collimator Common Fasteners Kit for REBUILDER

Keyless InteliKey for AMX-3

5 position Terminal Strip ONLY for Rear Tube to Connect GE AMX-4 Series X-ray Tube

3M Super 77 Multipurpose Adhesive, 4.4 oz. Sub to Hi-Strength 90

AMX-4 Collimator Detent Lock ASM (Old Style)

Microswitch for K7 Contactor 24VDC, 3 pole, 40A

Top Cover with Tech Switch and Display Boards Set.

Glue for Lock Latch Magnet - Loctite Super Glue Gel 0.14 Oz. (4g)

Cable Harness Connector 34 pin position, Female (A2A1) J8 Connector with 17 cable leads, 12" long with 2" heat shrink tubing, ty-rap # 8 label

Gloss Black Paint for Front Wheel Casters

Paint Kit for AMX-4 Cosmetic Repair Body Set. Includes: GEMS #1, 12 oz., Charoal Gray , 4.5 oz., Black paint for Front Casters, 12 oz., Brush, 2 small contour sanding pads, 1 fine foam sanding pad

Paint Kit for AMX-4 Plus Cosmetic Repair Body Set. Includes: GEMS #1, 12 oz., GEMS # 4 Gray , 4.5 oz., Black paint for Front Casters, 12 oz., Brush, 2 small contour sanding pads, 1 fine foam sanding pad.

Drive Handle 5 pins male connect to P16 Sensor Harness

Stainless Steel Cushion Clamp 1-5/8" for Long Can Capacitor

Stopper Block for detent - Complete Assembly with other parts, NEW Type

Stainless Steel Cushion Clamp 1-3/4" for Short Can Capacitor

K145 Relay on Drive Amplified PCB, 24 VDC, 15A

Solenoid Lock 45W (40f) protected