top of page

Troubleshooting AMX

Error Number
No 48 Volts power present
Error Code / System Message
​
Error Question
How do I troubleshoot 48 V power on the Brivo XR285amx Djinn generator?
Short Answer
The manual specifies 48 VDC ±2.5 V at the Djinn 48 V input with the indicated test setup.
Possible Causes
LVLE2 output fault; Power Module overcurrent; cable/connection problem.
Troubleshooting Steps
Measure the 48 V supply at the Power Module. If out of specification, test LVLE2 with system diagnostics and determine whether the Power Module is pulling the supply down.
Parts Areas to Check
​
For Related Models
Brivo XR285amx
bottom of page