FlashPad detector not register | AMCI Medical Imaging

top of page

Troubleshooting AMX

Error Number

FlashPad detector not register

Error Code / System Message

Error Question

How is a FlashPad detector registered on XR220amx or digitally upgraded XR200amx?

Short Answer

Initial detector registration is performed with a tether connection so the host PC can recognize the detector in relation to the system.

Possible Causes

Missing tether; detector not powered/booted; detector or system communication problem.

Troubleshooting Steps

Connect the tether, power the detector, open Detector Registration and use Add/Edit as required. If registration fails, run BIST/Ping and compare alternate communication methods.

Parts Areas to Check

For Related Models

Optima XR200amx, Optima XR220amx

bottom of page