AMX Troubleshooting & Technical Support
Results Count
Error Number
Error 19
Error Code System Message
ERROR 19 - Invalid drive command feedback
Question
What does ERROR 19 mean on a GE AMX-Series mobile X-ray?
Short Answer
ERROR 19: Invalid drive command feedback.
Possible Causes
Drive-command feedback was invalid.
Troubleshooting Steps
Check drive fuses, connectors and drive-control circuitry; investigate intermittent command feedback.
Parts Areas to Check
Drive control board; drive handle/Hall sensors; motor relays; drive motors; feedback wiring
For Related Models
AMX-4, AMX-4+, Definium AMX 700
Error Number
Error 19
Error Code System Message
19
Question
What should I check for error 19 on the AMX-4 Series?
Short Answer
1) Usually caused when the unit travels from carpet to tile, enters an elevator, or is driven over uneven tile flooring. This is generally a non-fatal error.
Possible Causes
Usually caused when the unit travels from carpet to tile, enters an elevator, or is driven over uneven tile flooring. This is generally a non-fatal error.
Troubleshooting Steps
1) Usually caused when the unit travels from carpet to tile, enters an elevator, or is driven over uneven tile flooring. This is generally a non-fatal error.
Parts Areas to Check
For Related Models
AMX-4, AMX-4+, Definium AMX 700
Error Number
Error 210
Error Code System Message
210
Question
What should I check for errors 210 on the AMX-4 Series?
Short Answer
1) Check the Drive Controller Board for proper feedback
Possible Causes
Check the Drive Controller Board for proper feedback
Troubleshooting Steps
1) Check the Drive Controller Board for proper feedback
Parts Areas to Check
For Related Models
AMX-4, AMX-4+, Definium AMX 700
Error Number
Error 210
Error Code System Message
ERROR 210 - Left stall feedback circuit fault
Question
What does ERROR 210 mean on a GE AMX-Series mobile X-ray?
Short Answer
ERROR 210: Left stall feedback circuit fault.
Possible Causes
Left stall-feedback circuitry appears defective.
Troubleshooting Steps
Check drive-board-to-CPU connection and left stall feedback.
Parts Areas to Check
Drive control board; drive handle/Hall sensors; motor relays; drive motors; feedback wiring
For Related Models
AMX-4, AMX-4+, Definium AMX 700
Error Number
Error 211
Error Code System Message
ERROR 211 - Right stall feedback circuit fault
Question
What does ERROR 211 mean on a GE AMX-Series mobile X-ray?
Short Answer
ERROR 211: Right stall feedback circuit fault.
Possible Causes
Right stall-feedback circuitry appears defective.
Troubleshooting Steps
Check drive-board-to-CPU connection and right stall feedback.
Parts Areas to Check
Drive control board; drive handle/Hall sensors; motor relays; drive motors; feedback wiring