AMX Troubleshooting & Technical Support
Results Count
Error Number
Bad pixel and video issues
Error Code System Message
Question
How do I test the Brivo XR285amx display for bad pixels or video problems?
Short Answer
The Video Test displays color bars and black/white screens for visual evaluation.
Possible Causes
Display panel defect; video path issue; bad pixels.
Troubleshooting Steps
Run Video Test and inspect the color-bar, black, and white screens. Use the pattern to distinguish display defects from application content problems.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Battery voltage issues
Error Code System Message
Question
What does the Power Control Limits test check on the Brivo XR285amx?
Short Answer
It compares actual battery voltage and current readings with expected limits.
Possible Causes
Low/high battery voltage; current measurement issue; battery or power-control fault.
Troubleshooting Steps
Run Power Control Limits and compare measured values with limits. If generator errors indicate low input voltage, confirm battery voltage at the Djinn input and investigate the battery path.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Brakes not releasing
Error Code System Message
Question
How do I test the brakes and mechanical releases on a Brivo XR285amx?
Short Answer
Brake Tests exercise the drive brakes, vertical-column release, column rotation, arm-extension releases, and tube-park latch.
Possible Causes
Brake actuator/control fault; release mechanism or sensor problem.
Troubleshooting Steps
Run Brake Tests and note which mechanism fails to receive a system signal. Inspect that actuator, switch, wiring, and control path.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Breaker control not working
Error Code System Message
Question
How do I test breaker control on a Brivo XR285amx?
Short Answer
The Breaker Trip diagnostic verifies that the system can control the breaker.
Possible Causes
Breaker-control circuit fault; system power-control issue.
Troubleshooting Steps
Run Breaker Trip in SUIF. If it fails, review power-control communication, battery input, breaker operation, and related generator input-power faults.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Bumper microswithes issues
Error Code System Message
Question
How do I test the bumper switches on a Brivo XR285amx?
Short Answer
The Bumper diagnostic verifies that the system properly reads bumper switch signals.
Possible Causes
Bumper switch, wiring, or input-control fault.
Troubleshooting Steps
Run Bumper and actuate the bumper switches as directed. If signals are missing or intermittent, inspect switch operation and wiring.
Parts Areas to Check