AMX Troubleshooting & Technical Support
Results Count
Error Number
Djinn inverter issues
Error Code System Message
Question
How do I test the Djinn inverter on the Brivo XR285amx?
Short Answer
The Inverter Test drives the MOSFET gates with a low DC bus to verify inverter functionality.
Possible Causes
Inverter/power-module fault; resonant component issue; DC-bus problem.
Troubleshooting Steps
Run Inverter Test and Resonant Components. If either fails, review kV/BB errors and isolate the Power Module, resonant components, and DC-bus connections.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Djinn software or database mismatch
Error Code System Message
Question
How do I correct a Brivo XR285amx Djinn software or database mismatch?
Short Answer
Load Djinn Beetle generator software with the correct database for the installed 15 kW or 30 kW configuration.
Possible Causes
Wrong/corrupted generator software or database; incompatible configuration.
Troubleshooting Steps
Confirm whether the generator is 15 kW or 30 kW. Through the system interface, load the matching software/database and then rerun diagnostics.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Drive direction and speed issues
Error Code System Message
Question
How do I diagnose Brivo XR285amx drive direction or speed problems?
Short Answer
The Drive Tests exercise drive directional and speed-control functionality.
Possible Causes
Drive motor/control fault; feedback or command problem.
Troubleshooting Steps
Run Drive Tests and compare the failed direction/speed with the symptom. Use error logs and control diagnostics to isolate the affected drive-control path.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Drive handle not working
Error Code System Message
Question
How do I test the Brivo XR285amx drive handle?
Short Answer
The Drive Handle Test checks whether the system recognizes drive-handle switch activation.
Possible Causes
Drive-handle switch/input fault; wiring or control issue.
Troubleshooting Steps
Run Drive Handle Test and verify activation is recognized. If not, inspect handle switching, wiring, and control inputs before replacing the drive assembly.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Drive login diagnostic test
Error Code System Message
Question
What does the Drive Login diagnostic test on the Brivo XR285amx?
Short Answer
It reports whether the system recognizes keypad functionality.
Possible Causes
Keypad/input recognition fault; control communication issue.
Troubleshooting Steps
Run Drive Login and verify each expected keypad input is recognized. If not, isolate the keypad/input path and related system-control communication.
Parts Areas to Check