AMX Troubleshooting & Technical Support
Results Count
Error Number
Error 0x0606
Error Code System Message
Question
What does 0x0606 mean on a GE Brivo XR285amx?
Short Answer
0x0606: Too many spits.
Possible Causes
The Djinn Beetle generator reported a kV FW fault: Too many spits.
Troubleshooting Steps
Run KV Measurement, KV Test, Inverter Test, and Resonant Components as applicable. Check the HV Tank-to-Power Module measurement cable, DC-bus error data, inverter/tank connections, and HV cables for arcing when indicated.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0606
Error Code System Message
Question
What does error 0x0606 mean on the Brivo XR285amx?
Short Answer
0x0606 means the generator detected too many high-voltage spits/arcs.
Possible Causes
HV cable/tube/tank arcing; damaged insulation; poor HV connection.
Troubleshooting Steps
Read the error data to identify the arc side: 1 = anode, 2 = cathode, 3 = both. Inspect the corresponding HV cable connections for cracks, damaged pins, arc tracks, seating, and grease.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0607
Error Code System Message
Question
What does 0x0607 mean on a GE Brivo XR285amx?
Short Answer
0x0607: Inverter resonant current time out.
Possible Causes
The Djinn Beetle generator reported a kV FW fault: Inverter resonant current time out.
Troubleshooting Steps
Run KV Measurement, KV Test, Inverter Test, and Resonant Components as applicable. Check the HV Tank-to-Power Module measurement cable, DC-bus error data, inverter/tank connections, and HV cables for arcing when indicated.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0608
Error Code System Message
Question
What does 0x0608 mean on a GE Brivo XR285amx?
Short Answer
0x0608: Inverter over current.
Possible Causes
The Djinn Beetle generator reported a kV FW fault: Inverter over current.
Troubleshooting Steps
Run KV Measurement, KV Test, Inverter Test, and Resonant Components as applicable. Check the HV Tank-to-Power Module measurement cable, DC-bus error data, inverter/tank connections, and HV cables for arcing when indicated.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0609
Error Code System Message
Question
What does 0x0609 mean on a GE Brivo XR285amx?
Short Answer
0x0609: kV not ready.
Possible Causes
The Djinn Beetle generator reported a kV FW fault: kV not ready.
Troubleshooting Steps
Run KV Measurement, KV Test, Inverter Test, and Resonant Components as applicable. Check the HV Tank-to-Power Module measurement cable, DC-bus error data, inverter/tank connections, and HV cables for arcing when indicated.
Parts Areas to Check