AMX Troubleshooting & Technical Support
Results Count
Error Number
Error 0x0787
Error Code System Message
Question
What does 0x0787 mean on a GE Brivo XR285amx?
Short Answer
0x0787: Single Wire communication impossible.
Possible Causes
The Djinn Beetle generator reported a Thermal SW fault: Single Wire communication impossible.
Troubleshooting Steps
Run Power Supply Thermal and the applicable thermal sensor tests. Check cooling, fans, sensor wiring, tube thermal-switch resistance, and single-wire communication before replacing a module.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0787
Error Code System Message
Question
What does error 0x0787 mean on the Brivo XR285amx?
Short Answer
0x0787: indicates single-wire communication is impossible.
Possible Causes
Single-wire thermal-device communication failure; tank/control connection issue.
Troubleshooting Steps
Use the Thermal Sensor no Tank test and related wiring checks. Verify thermal/ribbon cable connections and isolate whether the communication problem follows the tank or generator module.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0788
Error Code System Message
Question
What does 0x0788 mean on a GE Brivo XR285amx?
Short Answer
0x0788: Filament-bias sensor failure.
Possible Causes
The Djinn Beetle generator reported a Thermal SW fault: Filament-bias sensor failure.
Troubleshooting Steps
Run Power Supply Thermal and the applicable thermal sensor tests. Check cooling, fans, sensor wiring, tube thermal-switch resistance, and single-wire communication before replacing a module.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x0789
Error Code System Message
Question
What does 0x0789 mean on a GE Brivo XR285amx?
Short Answer
0x0789: Temperature conversion can’t be started.
Possible Causes
The Djinn Beetle generator reported a Thermal SW fault: Temperature conversion can’t be started.
Troubleshooting Steps
Run Power Supply Thermal and the applicable thermal sensor tests. Check cooling, fans, sensor wiring, tube thermal-switch resistance, and single-wire communication before replacing a module.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x078A
Error Code System Message
Question
What does 0x078A mean on a GE Brivo XR285amx?
Short Answer
0x078A: Thread controlling single wire devices is not responding.
Possible Causes
The Djinn Beetle generator reported a Thermal SW fault: Thread controlling single wire devices is not responding.
Troubleshooting Steps
Run Power Supply Thermal and the applicable thermal sensor tests. Check cooling, fans, sensor wiring, tube thermal-switch resistance, and single-wire communication before replacing a module.
Parts Areas to Check