AMX Troubleshooting & Technical Support
Results Count
Error Number
Error 0x0B87
Error Code System Message
Question
What does 0x0B87 mean on a GE Brivo XR285amx?
Short Answer
0x0B87: mA out of range.
Possible Causes
The Djinn Beetle generator reported a mA SW fault: mA out of range.
Troubleshooting Steps
Run mA Measurement and mA Test. Reseat the HV Tank J6-to-Power Module J7 measurement cable and perform the specified continuity/resistance checks; use filament ageing clearing/calibration when 0x0B84-0x0B86 is involved.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x8110
Error Code System Message
Question
What does 0x8110 mean on a GE Brivo XR285amx?
Short Answer
0x8110: CANopen communication overrun.
Possible Causes
The Djinn Beetle generator reported a CANopen SW fault: CANopen communication overrun.
Troubleshooting Steps
Review the error log and System Sanity communication tests. Inspect CAN communication connections and determine whether the node is powered and responding.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error 0x8130
Error Code System Message
Question
What does 0x8130 mean on a GE Brivo XR285amx?
Short Answer
0x8130: CANopen node guarding failure.
Possible Causes
The Djinn Beetle generator reported a CANopen SW fault: CANopen node guarding failure.
Troubleshooting Steps
Review the error log and System Sanity communication tests. Inspect CAN communication connections and determine whether the node is powered and responding.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Error code appear
Error Code System Message
Question
How do I get more information about a Brivo XR285amx error code?
Short Answer
The manual directs service personnel to review the error log; with the Class C service documentation loaded, selecting an error code displays additional information.
Possible Causes
An error code is present but its subsystem or cause is unclear.
Troubleshooting Steps
Open the system error log and select the relevant code. Use the corresponding service documentation and generator error table to identify the device, origin, and fault description.
Parts Areas to Check
For Related Models
Brivo XR285amx
Error Number
Filament driver fault
Error Code System Message
Question
How do I troubleshoot filament driver faults on the Brivo XR285amx?
Short Answer
Use Fil1/Fil2 closed-loop, transformer-primary, and short-circuit diagnostics to distinguish filament driver, transformer, HV cable, and tube faults.
Possible Causes
Filament driver fault; transformer-primary issue; HV cable/tube filament issue; 48 V supply fault.
Troubleshooting Steps
Run the matching filament diagnostics. Inspect J5/J6 heater cable, cathode HV cable, and filament impedance. Use the no-tube/no-HV-cable tests when needed to isolate tube versus cable/generator.
Parts Areas to Check