AMX Troubleshooting & Technical Support
Results Count
Error Number
Blinking RED - Detector warning
Error Code System Message
Blinking RED - Detector warning
Question
What does “Blinking RED” mean on a GE Definium AMX 700?
Short Answer
Blinking RED: Detector warning.
Possible Causes
Subsystem/category: Digital Detector. Source classification: LED STATUS.
Troubleshooting Steps
Proceed with caution and log the date/time and scenario.
Parts Areas to Check
TRAD digital detector
For Related Models
Definium AMX 700
Error Number
Both LEDs OFF - Detector has no power
Error Code System Message
Both LEDs OFF - Detector has no power
Question
What does “Both LEDs OFF” mean on a GE Definium AMX 700?
Short Answer
Both LEDs OFF: Detector has no power.
Possible Causes
Subsystem/category: Digital Detector. Source classification: LED STATUS.
Troubleshooting Steps
Close the exam and restart if the no-power state is unexpected.
Parts Areas to Check
TRAD digital detector
For Related Models
Definium AMX 700
Error Number
C-CODE HB
Error Code System Message
C-CODE HB - C-code heartbeat
Question
What does “C-CODE HB” mean on a GE Definium AMX 700?
Short Answer
C-CODE HB: C-code heartbeat.
Possible Causes
Subsystem/category: Beetle Board. Source classification: LED STATUS.
Troubleshooting Steps
Interpret the LED together with the system symptom and use the matching Beetle/power/exposure troubleshooting path.
Parts Areas to Check
Beetle Interface Board
For Related Models
Definium AMX 700
Error Number
C-CODE HB LED
Error Code System Message
C-CODE HB - DS1 GREEN blinking
Question
What does the C-CODE HB LED mean on the GE Definium AMX 700?
Short Answer
Blinking indicates embedded-processor C-code is running correctly.
Possible Causes
C-code heartbeat
Troubleshooting Steps
Use the LED state together with the system symptom. If the LED indicates an error, inhibit or temperature condition, perform the corresponding subsystem troubleshooting before replacing the board.
Parts Areas to Check
Beetle Interface Board
For Related Models
Definium AMX 700
Error Number
Cannot obtain worklist
Error Code System Message
Question
Why can’t the Definium AMX 700 retrieve a Modality Worklist?
Short Answer
First verify physical/logical networking, then confirm the system and MWL server IP address, AE Title and DICOM port and run C-Echo.
Possible Causes
Network issue; wrong MWL IP; AE Title mismatch/case error; wrong DICOM port; query configuration issue.
Troubleshooting Steps
Document the system AE Title, DICOM port and IP. Open Network Connections, select the MWL server, verify its IP/AE Title/port, then run C-Echo. If C-Echo passes, review the error log and MWL query configuration.
Parts Areas to Check
AMX 700 DICOM configuration; MWL server; hospital network