AMX Troubleshooting & Technical Support

Results Count

Error Number

Detector LED status BIST in progress pattern

Error Code System Message

BIST in progress pattern

AMX 700 detector BIST in progress pattern, TRAD detector LED, Built In Self Test running

Question

What does BIST in progress pattern mean on the Definium AMX 700 detector?

Short Answer

Built In Self Test running.

Possible Causes

Built In Self Test running

Troubleshooting Steps

Wait for BIST to complete before interpreting detector status.

Parts Areas to Check

TRAD digital detector

For Related Models

Definium AMX 700

Error Number

X-RAY ON LED

Error Code System Message

X-RAY ON - DS13 RED

AMX 700 X-RAY ON LED, Beetle Board X-RAY ON, X-ray ON signal active

Question

What does the X-RAY ON LED mean on the GE Definium AMX 700?

Short Answer

The X-ray ON signal is active.

Possible Causes

X-ray ON signal active

Troubleshooting Steps

Use the LED state together with the system symptom. If the LED indicates an error, inhibit or temperature condition, perform the corresponding subsystem troubleshooting before replacing the board.

Parts Areas to Check

Beetle Interface Board

For Related Models

Definium AMX 700

Error Number

12 V debug-header value low or zero

Error Code System Message

12V debug header

AMX 700 low 12V, debug header pin 2

Question

What does low or zero 12 V on the Definium AMX 700 debug header indicate?

Short Answer

Very low 12 V suggests a current overload; 0 V can result from converter over-temperature, input over/under-voltage, converter failure or other supply faults.

Possible Causes

12 V output overload; converter over-temperature; input voltage fault; converter failure.

Troubleshooting Steps

Measure debug-header connection 2. If very low, isolate 12 V loads. If 0 V, check converter temperature/input conditions and the 12 V converter.

Parts Areas to Check

Digital Power Supply; 12 V loads

For Related Models

Definium AMX 700

Error Number

1V5 - 1.5 V FPGA core power present

Error Code System Message

1V5 - 1.5 V FPGA core power present

1V5, DS19 GREEN, AMX 700 1V5, 1.5 V FPGA core power present

Question

What does “1V5” mean on a GE Definium AMX 700?

Short Answer

1V5: 1.5 V FPGA core power present.

Possible Causes

Subsystem/category: Beetle Board. Source classification: LED STATUS.

Troubleshooting Steps

Interpret the LED together with the system symptom and use the matching Beetle/power/exposure troubleshooting path.

Parts Areas to Check

Beetle Interface Board

For Related Models

Definium AMX 700

Error Number

1V5 LED

Error Code System Message

1V5 - DS19 GREEN

AMX 700 1V5 LED, Beetle Board 1V5, 1.5 V FPGA core power present

Question

What does the 1V5 LED mean on the GE Definium AMX 700?

Short Answer

The FPGA core voltage is present.

Possible Causes

1.5 V FPGA core power present

Troubleshooting Steps

Use the LED state together with the system symptom. If the LED indicates an error, inhibit or temperature condition, perform the corresponding subsystem troubleshooting before replacing the board.

Parts Areas to Check

Beetle Interface Board